12
EN109-1665751-44
6.5 Checking the running surface
After the treadmill has been switched on, you must check whether the running surface is correctly centred. As
long as the band does not come into contact with the motor cover while it is moving, the band is properly
aligned. Differences in the underlying surfaces may mean that it is first necessary to align the running surface
(see section 11.3.1
‘Aligning the running surface’).
6.6 System settings
The factory setting for the instructions displayed in the information screen is English.
All the display values are set to SI units (metric) in the factory. The units and/or language can be modified by
changing the default settings in the system menu (see section 10
.7 ‘System settings’).
6.7 Relocation and transportation
When relocating or transporting the EN-Motion (for example in order to clean the floor beneath the treadmill),
pulling on the side supports (where applicable) and/or the running surface is not permitted.
6.8 Electromagnetic interference
•
If the treadmill is used in the immediate vicinity (i.e. at a distance of 2 metres or less) of short-wave
equipment which is in operation, instability of the information in the operating console of the EN-Motion
may occur.
•
In order to avoid electromagnetic influence, we would advise connecting the EN-Motion and the short-wave
equipment to different mains supply groups.
•
Ensure that the mains cable of the short-wave equipment does not pass near the EN-Motion or the patient.
In the case of persistent disturbance caused by electromagnetic interference, contact your supplier.
7 Intended use
The EN-Motion is a treadmill for exercising as part of Medical Training Therapy or rehabilitation.
The EN-Motion devices are medical training devices that must be operated by or under the supervision of a
trained clinician, who understands the principals, benefits and limitations of Medical Training Therapy (MTT).
