20
EN109-1665751-44
9.2.12
The AUTOSTOP function
The AUTOSTOP function is an extra safety feature which uses the
sensor [2]
built into the sensor unit. The
sensor detects whether the user is on the running surface of the band. If the user steps off the band while it is
still moving, the sensor will also detect this and the band will automatically come to a (temporary) standstill. A
message will also appear on the screen stating that the AUTOSTOP function is active (see fig. 17). If the user
returns to the running surface of the treadmill within 30 seconds, the training can be resumed by pressing the
OK button
. The user can also bring the training to a permanent end by pressing the
STOP button
within 30
seconds. As soon as the 30-second period has expired, the treadmill will automatically display the Results
screen. You can activate or deactivate the AUTOSTOP function in the System settings menu (see section
10.7).
Comment:
during
Fitness tests
(even though the AUTOSTOP function is active), it is not possible to
resume the training session. The band will immediately come to a definitive standstill and a message will
appear on the information screen (fig. 19).
Figure 17
Figure 18
Figure 19
9.3 The LCD information screen
During the operation of the treadmill, various information screens are displayed in the window. These can
largely be divided into 3 groups according to function: navigation screens, daa screens and warning screens.
Navigation screens guide the user through choosing between the various functions and entering details such
as length or weight. Text at the bottom of each navigation screen clearly states which action is required.
Navigation screens will only appear while the band is not yet moving.
Sample ‘Navigation screens’
Data screens may be displayed in the window both during and after the termination of the training session. A
data screen contains relevant information (parameters) about the selected training session or test.
