61
EN109-1665751-44
A new screen,
Maximum speed
(for
Autospeed), will appear.
The maximum speed is an extra safety
feature (a kind of ‘speed limiter’) which
prevents the band accelerating
unintentionally to the maximum speed
(18 km/h).
Enter the desired maximum speed
using the
central controller
and press
OK
(default setting = 5 km/h).
The
Main menu
will appear and the
indicator lamp will now illuminate
constantly, to show that the Autospeed
function is ready (on stand-by).
Steps 2 and 3 SELECT TRAINING SESSION AND START THE BAND (Quick start example)
.
From the
Main menu
, select the
Quick start
function and press
OK
to
start the training session.
A screen showing the flashing text
‘START WALKING’ indicates that the
training session will take place with
automatic speed adjustment
(Autospeed). The band will now start
to move.
Com
ment: if ‘Calories burned’ has been activated (see 10.2 Quick start), a screen in which you must
enter the use
r’s weight will first appear after you have confirmed the selection of the Quick start function.
Then press OK to start the training session.
10.6.2
Likewise before the start of the training session, but this time from a submenu
The training (for example
Quick start
or
Exercise goals
) has therefore already been selected but the band is
NOT YET IN MOTION.
This means: first
SELECT TRAINING SESSION AND ENTER SETTINGS
, then
SELECT AUTOSPEED
and
only then
START THE BAND
(using the Autospeed function).
Step 1
SELECT TRAINING SESSION AND ENTER SETTINGS
From the
Main menu
, select the desired function (for example Quick start) and press
OK
.
The so-called
data screen
will appea
r (unless ‘Calories burned’ has been activated; in this case, first
enter the weight).
Do NOT yet start the band!
Step 2
SELECT AUTOSPEED
Press the
AUTO button
. The indicator lamp will now start to flash (green).
If the security function is switched off, the response profiles screen will also appear.
If the security function is activated, however, the padlock screen will first appear. In this case, first
enter the code. Then select the desired profile and press
OK
.
Now enter the desired m
aximum Autospeed speed
.
Step 3
START THE BAND
Press
OK
to start the band automatically.
A screen showing the flas
hing text ‘START WALKING’
indicates that the training session will take place with automatic speed adjustment
(Autospeed). The band will now start to move. The indicator lamp will now illuminate constantly,
to show that the Autospeed function has been activated.
