77
EN109-1665751-44
The cursor will mark programme phase 1.
Press
OK
to go to
time
.
Enter the desired time for programme phase
1 using the
central controller
.
Press
OK
and enter the
speed
using the
central controller
.
Press
OK
and enter the
inclination
using the
central controller
.
Press
OK
and specify whether you wish to
programme the next phase (yes/no).
Select
yes
to programme the next phase.
The cursor will automatically jump to phase
2.
Enter the desired time, speed and inclination
for programme phase 2.
Press
OK
and specify whether you wish to
programme the next phase (yes/no).
Select
no
if you do not wish to programme
any further phases. The cursor will
automatically jump to
save
. Press
OK
to
continue.
The list of protocols will appear.
Select the desired programme position (P1 to
P30) using the
central controller
and press
OK
to save the programme.
Please note:
the ‘Add’ function can only be
used to add programmes! You can use this
function until all the available programme
positions (30) have been filled. This function
can therefore not be used to edit or overwrite
programmes (this must be done using the
‘Edit’ function).
A message on the screen will show that the
programme has been saved.
You will automatically return to the
Personal
protocols
menu.
