10
EN109-1665751-44
The person involved may only participate in the test if medical screening has taken place, both
cardiocirculatory and cardiorespiratory as well as orthopaedic. For maximum exertion tests, an anamnesis,
physical examination and ECG (at rest and under exertion) are recommended as screening beforehand.
For healthy people, the completion of a Physical Activity Readiness Questionnaire (PAR-Q) may be
sufficient. The screening with this questionnaire must be undertaken again at the start of each testing
(day). For an example of the PAR-Q see Addendum A
The equipment used must be well maintained and calibrated to obtain reliable measurements.
Prior to the test, a proper standardised warming-up activity must be performed if this has not been included
in the measurement protocol of a test.
During and after a test has finished there must be a proper check of the tested person. The person
involved must at all times be able to break off from the test.
5.4 Caution
The device is mains-powered. Only use parts supplied or recommended by Enraf-Nonius. An incorrect
supply voltage may damage the device or lead to increased emissions from or reduced immunity for the
EN-Motion. Damage may result if this instruction is not followed.
5.5 Please note
•
Patient stop button (optional accessories)
: the treadmill will stop automatically as soon as the patient
stop button is pressed. In this case, the programme can only be resumed by first returning to the main
menu and resetting the training programme in question (see also 9.2.11
‘Patient stop button’).
•
Should your EN-Motion treadmill develop a fault, please contact your supplier or Enraf-Nonius B.V.
(Rotterdam, the Netherlands). Repairs and installations may only be carried out by a service technician
who has been authorised by Enraf-Nonius.
•
Repairs not carried out by service technicians authorised by Enraf-Nonius and/or the use of non-original
(spare) parts and/or ancillary materials will cause the guarantee to lapse.
