Digital Video Recorder
73
You can also narrow your event search by selecting the
Option…
button and setting up the new search condition.
You can search video from the first to last recorded images, or you can set the start and stop times and dates.
Highlight the box beside
From
and press the
button to toggle between On and Off. When set to Off, you can enter
a specific Date and Time. When set to On, the search will be from the first recorded image. When highlighting
and
pressing the
button the bookmark list displays and the bookmark point you selected will be the starting date and time.
Highlight the box beside
To
and press the
button to toggle between On and Off. When set to Off, you can enter a
specific Date and Time. When set to On, the search will be from the last recorded image. When highlighting
and
pressing the
button the bookmark list displays and the bookmark point you selected will be the ending date and time.
Highlight the box beside
Type
and press the
button. You can select between
Motion Search
and
Museum Search
.
Motion Search
detects motion in the defined area.
Museum Search
detects if a defined object has moved.
Highlight the box beside
Zone
and press the
button. An image from the video appears with a grid overlaid. You
can turn sensor blocks On and Off to define the area of the picture in which you want to search for motion.
NOTE: Defining the area of the image in which you want to search for motion is nearly identical to setting up the
DVR for Motion. Please refer to Motion Screen in Chapter 3 — Configuration for more detailed instructions
on setting up the detection blocks.
When setting the Museum Search Zone, the zone should be placed inside of the border line of the target
object. If the selected block is placed on the border line, the sensitivity of the Museum Search may decrease.
The zone should be placed or focused on the centre or, at least, within the outline of targeted object.
Highlight the box beside
Sensitivity
and press the
button. You will be able to select from
1
(low sensitivity) to
5
(high sensitivity).
Highlight the box beside
Min. Blocks
and press the
button. You will be able to set the number of sensor blocks that
must be activated.
Once you set your desired search conditions, highlight
Search
and press the
button to display the search results in
the
Motion
Search
screen. Selecting
Cancel
exits the screen without saving the changes.
When you search for motion events of another camera, you will be asked whether or not you want to delete the previous
search results from the list.
Summary of Contents for TVR-2008AM4.0
Page 1: ...EN User Manual Hybrid Video Recorder TVR 2008AM4 0 TVR 2016AM4 0...
Page 5: ...User s Manual iv...
Page 9: ......
