User’s Manual
10
Arrow Buttons
These buttons are used to navigate through menus and GUI. You can also use them to change numbers by highlighting
a number in the menu and using the
Up
and
Down
arrow buttons to increase or decrease the number’s value.
These buttons are also used to control Pan and Tilt when in the PTZ mode. When in the PIP display format, pressing
the
Up
and
Down
arrow buttons moves the position of the small screen counter-clockwise and clockwise, and pressing
the
Left
and
Right
buttons changes the PIP screen size.
In the playback mode, pressing the
button plays video backward at high speed. Pressing the button again toggles
the playback speed from
,
and
. The screen displays
,
and
respectively. Pressing the
button plays video forward at high speed. Pressing the button again toggles the playback speed from
,
and
. The screen displays
,
and
respectively. When in the pause mode, pressing the
button
moves to the next image and pressing the
button moves to the previous image.
PLAY/PAUSE Button
In the live monitoring mode, pressing the
button freezes the current screen and the screen displays
icon. When
in the playback mode, pressing the
button plays back images at regular speed or pauses playing video.
Pressing the
button selects a highlighted item or completes an entry that you have made during system setup.
PANIC Button
Pressing the
PANIC
button starts panic recoding of all camera channels, and displays on the screen. Pressing the
button again will stop panic recording.
PLAYBACK Button
Pressing the
PLAYBACK
button enters the playback mode, and pressing the button again exits the playback mode. When
entering the playback mode, video is paused. Pressing the
(Play/Pause) button plays back video at regular speed.
The screen displays when the DVR is in the Pause mode and the screen displays when the DVR is playing back video.
When in one of the multi-view formats, pressing this button enters the Triplex mode. The DVR supports the Triplex
function: monitoring, recording and playing back at the same time.
ALARM Button
The
ALARM
button has two functions. First, it will reset the DVR’s outputs including the internal buzzer during an
alarm. Second, it will display the event log when you are in the live monitoring mode unless there is an active alarm.
This operation can be user password protected.
CLIP COPY Button
Pressing the
CLIP COPY
button allows you to copy video clips.
ZOOM/PTZ Button
Pressing the
ZOOM/PTZ
button zooms in the current image in double on the screen. You can use the arrow buttons to
move the rectangle to another area. Pressing the
(Play/Pause) button zooms in the image in rectangle.
Pressing and holding the button for three seconds or longer enters the PTZ (Pan/Tilt/Zoom) mode and the PTZ icon
flickers. Pressing the button again exits the PTZ mode. Pressing the arrow buttons or
MENU/CAMEO
button allows
you to control properly configured cameras.
Summary of Contents for TVR-2008AM4.0
Page 1: ...EN User Manual Hybrid Video Recorder TVR 2008AM4 0 TVR 2016AM4 0...
Page 5: ...User s Manual iv...
Page 9: ......
