Digital Video Recorder
43
Highlight
Use UPnP
and press the
button to toggle between On and Off. When it is On, port forwarding from the
NAT (Network Address Translation) device to the DVR will be enabled automatically via UPnP (Universal Plug and
Play) service. This function will be especially useful when accessing a port on a private IP address.
NOTE: For the UPnP service to work, the NAT device should support the UPnP Port Forwarding function and
the function should be set to enabled.
You cannot change the port settings when Use UPnP is On.
Highlight the
Status
box and press the
button to display the port numbers forwarded from the NAT device via UPnP
service.
Highlight the
Test
box and press the
button to test the current LAN settings you made.
Selecting
DHCP
from the Type and highlighting
Save
button reads the current IP address of the DVR configured by
DHCP (Dynamic Host Configuration Protocol) network.
Highlight
Auto
(Default) and press the
button to toggle between On and Off. When it is On, the DVR will obtain
the IP address of the DNS server automatically.
NOTE: Selecting Auto will only be enabled when the DVR is configured for DHCP network.
NOTE: If the DVR is configured for DHCP network, the IP address of the DVR might change whenever the unit is
turned on.
Summary of Contents for TVR-2008AM4.0
Page 1: ...EN User Manual Hybrid Video Recorder TVR 2008AM4 0 TVR 2016AM4 0...
Page 5: ...User s Manual iv...
Page 9: ......
