Eneo TVR-2008AM4.0, User Manual

Page: 38 / 100

Digital Video Recorder
29
NOTE: When multiple events are detected at the same time from a specific channel, the DVR will record event
video with the high setting values if the ips, Quality, Resolution and Dwell values of events are different
from each other. However, the ips will be reset to the supported maximum value when the ips, Quality,
Resolution and Dwell are all set to the highest value. (Advanced Mode Only)
Highlight the box under the heading and press the
button to delete the recording settings. You will be asked to
confirm that you want to delete the settings.
NOTE: The resolution can be set up at a time for each event or separately for each channel of an
event(Advanced Mode only). When setting up at a time for each event, the following options are
available: Very High, High and Standard. Selecting Very High, the highest resolution will be applied.
Selecting Standard, the lowest resolution, and selecting High, the other resolution will be applied.
When setting up separately for each channel of an event, you can select any resolution supported by
the camera mode (720, 960 or HD).
< Event > < 720 Mode > < 960 Mode > < HD Mode >
Highlight Default… and press the
button. The Default screen appears.
Highlighting boxes under
ips
and pressing the button allows you to set the images per second for Time and Event
recording.
Highlighting boxes under
Quality
and pressing the button allows you to set the recorded image quality for Time
and Event recording. You can select from:
Very High
,
High
,
Standard
and
Basic
.
Highlighting boxes under Resolution and pressing the button allows you to set the recorded image resolution for
Time and Event recording. You can select from: Very High , High and Standard .
NOTE: When the resolution is 1920x1080, the ips will be limited to the maximum 10 ips per channel.
Highlighting boxes under Dwell and pressing the button allows you to set the length of time you would like to record
for the associated event. (Advanced Mode Only)