1 Safety instructions
Mycom S CLM 153
6
EHauser
Ex documentation (according to approval and test centre
(
0
Europe,
2
USA,
1
Canada).
•
The measuring device complies with the general safety requirements in accordance
with EN 61010, the EMC requirements of EN 61326, and NAMUR Recommendation
NE 21, 1998.
•
The manufacturer reserves the right to change the technical data in line with technical
progress at any time. You can obtain information on the current version of these
Operating Instructions and possible additions from your E+H sales centre.
1.4.1
Immunity to interference
This instrument has been tested for electromagnetic compatibility in industrial use
according to applicable European standards. It is protected against electromagnetic
interference by the following design measures:
•
cable screening
•
interference suppression filter
•
interference suppression capacitors
#
Warning!
Protection against interference as specified above is valid only for an instrument
connected according to the instructions in these Operating Instructions.
1.5
Return
If the transmitter has to be repaired, please return it
cleaned
to the E+H sales centre
responsible. You can find the address on the last page of these instructions. For returns
please use the original packaging.
With the instrument, please enclose a completed copy of the "Declaration of
Contamination" form. You can find this at the end of these Operating Instructions.
