Mycom S CLM 153
1 Safety instructions
Hauser
5
1.2
Designated use
The transmitter Mycom S CLM 153 is a device for measuring conductivity. The
transmitter is designed for measuring or control tasks in applications in the following
industries:
•
Chemical process systems
•
Pharmaceuticals
•
Foodstuff industry
•
Water treatment and monitoring
The Ex-version of the Mycom S CLM 153 makes operation in hazardous atmospheres
also possible (see "Certificates" in the product structure on page 7).
Any other use than the one described here compromises the safety of persons and the
entire measuring system and is, therefore, not permitted.
The manufacturer is not liable for damage caused by improper or non-designated use.
1.3
Installation, Commissioning, Operation
Please note the following items:
•
Installation, electrical connection, commissioning, operation and maintenance of the
measuring system must only be carried out by trained technical personnel.
The technical personnel must be authorised for the specified activities by the system
operator.
•
Technical personnel must have read and understood theses Operating Instructions
and must adhere to them.
•
Before commissioning the entire measuring point, check all the connections for
correctness. Ensure that electrical cables and hose connections are not damaged.
•
Do not operate damaged products and secure them against unintentional
commissioning.
•
Measuring point faults may only be rectified by authorised and specially trained
personnel.
•
If faults can not be rectified, the products must be moved from service and secured
against unintentional commissioning.
•
Repairs not described in these Operating Instructions may only be carried out at the
manufacturer’s or by the Hauser service organisation.
1.4
Operational safety
#
Warning!
If the device is used for any application other than those described in these Operating
Instructions, it may lead to unsafe and improper functioning of the measuring system
and is therefore not permitted.
The instrument has been designed and tested according to the state of the art and left
the factory in perfect functioning order. The instrument meets all the prevailing
regulations and EC directives - see "Technical data".
However, always pay attention to the following points:
•
Measuring systems used in Ex areas have a separate document (XA 233C/07/a3)
which forms a
component part
of these Operating Instructions. Always follow the
installation regulations and the - partly deviating - connection data of the Ex documen-
tation as well. You can find the following symbols on the front page of the additional
