Operating menu and parameter description
iTHERM TrustSens TM371, TM372
88
Hauser
Hardware revision
Navigation
Diagnostics → Device information → Hardware revision
Description
Indication of the hardware revision of the device.
Configuration counter
Navigation
Diagnostics → Device information → Configuration counter
Description
Use this function to display the counter reading for changes to device parameters.
Static parameters, whose values change during optimization or configuration, cause
this parameter to increment by 1. This supports parameter version management. If
several parameters change, e. g. due to loading of parameters from FieldCare, etc. in
the device, the counter can show a higher value. The counter cannot be reset and is
also not reset to the default value when the device is reset. If the counter overflows,
(16 bit), it starts again at 1.
14.3.4 "Measured values" submenu
Sensor value
Navigation
Diagnostics → Measured values → Sensor value
Description
Use this function to display the current measured value at the sensor input.
Sensor raw value
Navigation
Diagnostics → Measured values → Sensor raw value
Description
Use this function to display the non-linearized mV/Ohm value at the specific sensor input.
Device temperature
Navigation
Diagnostics → Measured values → Device temperature
Description
Use this function to display the current electronics temperature.
Summary of Contents for iTHERM TrustSens TM371
Page 2: ......
Page 106: ...www addresses endress com ...