Endress+Hauser iTHERM TrustSens TM371, Operating Instructions Manual

Page: 74 / 106

Operating menu and parameter description iTHERM TrustSens TM371, TM372
74 Hauser
14 Operating menu and parameter description
The following tables list all the parameters in the "Setup", "Calibration", "Diagnostics"
and "Expert" operating menus. The page reference indicates where a description of the
parameter can be found in the manual.
Depending on the parameter configuration, not all submenus and parameters are
available in every device. Information on this can be found in the parameter
description under "Prerequisite".
This symbol indicates how to navigate to the parameter using operating tools (e.g.
FieldCare).
Setup → Device tag →  78
Unit →  78
4 mA value →  78
20 mA value →  79
Failure mode →  79
Calibration → Number of self-calibrations →  79
Stored self calibration points →  79
Deviation →  80
Adjustment →  80
Calibration → Limits → Lower warning value →  80
Upper warning value →  80
Lower alarm value →  81
Upper alarm value →  81
Calibration → Interval monitoring
1)
→ Control →  82
Start value →  82
Countdown value →  82
1) Same parameter settings both for self calibration monitoring and manual calibration reminder
Calibration → Calibration report

Online wizard
→  83
Diagnostics → Actual diagnostics →  83
Previous diagnostics 1 →  83
Operating time →  84
Diagnostics → Diagnostic list→ Actual diagnostics count →  84
Actual diagnostics →  84
Actual diag (n) channel
1)
→  84
1) n = 2, 3; diagnostics messages with the highest priority to the third-highest priority