Operating menu and parameter description
iTHERM TrustSens TM371, TM372
90
Hauser
Reset device temp. min/max values
Navigation
Diagnostics → Measured values → Min/max values → Reset device temp. min/max
values
Description
Use this function to reset the maximum indicators for the minimum and maximum
electronic temperatures measured.
User entry
By clicking the button
Reset device temp. min/max values
the reset function is activated.
As a result, the device temperature min/max values are just indicating the reset,
temporary values.
14.3.5 "Simulation" submenu
Diagnostic simulation
Navigation
Diagnostics → Simulation → Diagnostic simulation
Description
Use this function to switch diagnostic simulation on and off.
Options
Use the dropdown menu to enter one of the diagnostic events → 37. In the simulation
mode the assigned status signals and diagnostic behaviors are applied.
Example: x001-Device failure
Factory setting
Off
Current output simulation
Navigation
Diagnostics → Simulation → Current output simulation
Description
Use this function to switch simulation of the current output on and off. The status signal
indicates a diagnostic message of the "function check" category (C) while simulation is in
progress.
Options
• Off
• On
Factory setting
Off
Value current output
Navigation
Diagnostics → Simulation → Value current output
Summary of Contents for iTHERM TrustSens TM371
Page 2: ......
Page 106: ...www addresses endress com ...
