Endress+Hauser iTHERM TrustSens TM371 Operating Instructions Manual Download Page 87

Page: 87 / 106

iTHERM TrustSens TM371, TM372

Operating menu and parameter description

Hauser

Navigation

Diagnostics → Device information → Order code

Description

Use this function to display the order code of the device. It can also be found on the

nameplate. The order code is generated from the extended order code, which defines all

the device features of the product structure. In contrast, the device features cannot be read

directly from the order code.

Uses of the order code

• To order an identical spare device.

• To identify the device quickly and easily, e.g. when contacting the manufacturer.

Extended order code n

n = Number of parts of the extended order code (n = 1 to 3)

Navigation

Diagnostics → Device information → Extended order code n

Description

Use this function to display the first, second and/or third part of the extended order code.

On account of length restrictions, the extended order code is split into a maximum of 3

parameters. The extended order code indicates the version of all the features of the

product structure for the device and thus uniquely identifies the device. It can also be

found on the nameplate.
• Uses of the extended order code

• To order an identical spare device

• To check the ordered device features against the shipping note

Manufacturer ID

Navigation

Diagnostics → Device information → Manufacturer ID

Expert → Communication → HART info → Manufacturer ID

Description

Use this function to view the manufacturer ID with which the device is registered with the

HART FieldComm Group.

Display

2-digit hexadecimal number

Factory setting

0x11

Manufacturer

Navigation

Diagnostics → Device information → Manufacturer

Description

Indication of the manufacturer name.

Summary of Contents for iTHERM TrustSens TM371











































































































Search results

Summary of Contents for iTHERM TrustSens TM371

Reviews:

Related manuals for iTHERM TrustSens TM371

Brands by name

Popular brands

Endress+Hauser iTHERM TrustSens TM371, Operating Instructions Manual

Search results

Summary of Contents for iTHERM TrustSens TM371

Reviews:

Related manuals for iTHERM TrustSens TM371

Brands by name

Popular brands