Operation
Biometra TOne
46
Program parameters
Display
(example)
Description
Time increment
Δt
The holding time is increased by the time in-
crement in each cycle.
Heat.-/Cool rate
!
The heating and cooling rate for the selected
step was adjusted in the program.
Gradient
55.0 +1.0
The block temperature increases or de-
creases column by column by the tempera-
ture increment [°C] starting from the anneal-
ing temperature [°C].
Understanding the spreadsheet
view
During a program run, the current step is highlighted in yellow.
In spreadsheet view all parameters are summarized in a table.
Loops
Step
Block Temp. (°C)
Hold Time
(h:mm:ss)
Go To
Cycles
∆T(°C)
∆t(s)
∆R(°C/s)
30x
1
2
3
4
5
6
4.0
2
30
95.0
95.0
55.0
72.0
72.0
16.0
0:05:00
0:05:00
0:00:30
0:00:30
0:00:30
∞
4.0
4.0
4.0
3.0
4.0
0.5
2
Fig. 24
Spreadsheet view during a program run
Program parameters
Display
(example)
Description
Step
1
There is at least one block temperature and
holding time for each program step. All other
parameters are optional.
For more than 6 program steps, use the ar-
row keys to navigate through the displayed
program.
Block Temp. (°C)
95.0
Temperature of the sample block within the
range of 3 to 99 °C for the respective pro-
gram step
Hold Time (h:mm:ss)
0:05:00
After the heating phase, the sample block
will keep the block temperature for the speci-
fied holding time.
Loops
Go To
Cycles
30x
2
30
The selected steps are repeated cyclically x
times.
In this example, the program will go back to
step 2 after completing step 4 and reiterate
this cycle 30 times.
Temperature increment
0.5
The block temperature is increased or de-
creased by the displayed temperature incre-
ment [°C] in each cycle.
Time increment
2
The holding time is extended by the dis-
played time increment [s] in each cycle.
