ENCAD T-200 and T-200+ Service Manual
Maintenance
3-13
Stepper Motor Winding Resistance Check
RED
WIRE
7.2-8.0
ohms
7.2-8.0
ohms
Figure 3-8. Stepper Motor.
1. Disconnect the stepper motor connection from J10 on the
MPWA.
2. Using a standard ohmmeter or multimeter, measure between
pins 1 (red wire) and 3.
3. The reading should indicate 7.2-8.0 ohms.
4. Continue by measuring between pins 4 and 6.
5. Reading should also indicate 7.2-8.0 ohms.
6. If either measurement is out of tolerance, replace the stepper
motor.
Summary of Contents for T-200
