ENCAD T-200 and T-200+ Service Manual
Assembly\Disassembly
5-10
Figure 5-4. Removal of the Left Cover.
Reinstalling the Left Cover
To reinstall the Left Cover, proceed as follows:
1. While holding the Left Cover, reinstall the three screws that
secure the Left Cover. The four screws are reinserted as shown on
Figure 5-4. All screws should be torqued to 15 in-lbs.
Do not
overtighten.
2. Put the Top Cover back on.
Removing the Servo Motor
To remove the Servo Motor, proceed as follows:
1. Disconnect the power cord and the interface cables.
2. Remove the Top Cover.
3. Remove the Trailing Cable Cover from the Y-Arm Assembly in
order to have easier access to the Frame Tensioner and to the
screws that hold the Servo Motor in place.
Summary of Contents for T-200
