ENCAD T-200 and T-200+ Service Manual
Assembly\Disassembly
5-6
To remove the MPWA:
1. Put on an ESD wrist strap.
2. Use a #2 6” Phillips screwdriver to remove the three remaining
screws holding the MPWA onto the side plate. See Figure 5-2 for
locations. Hold the top of the MPWA while removing the screws.
3. Place the MPWA in an ESD bag (anti-static bag) in preparation
for shipment to
ENCAD
for replacement or repair, or if it is to be
stored for repair at your facility.
Removing the Right Side Plate
Figure 5-3. Removal of the Right Side Plate.
To remove the Right Side Plate:
1. Remove the Top Cover.
2. Remove the Right Cover Assembly.
3. Disconnect the MPWA connections and remove the MPWA.
Summary of Contents for T-200
