Emotiontek MCU 2 Axis, User Manual

Page: 149 / 204

- 142 -
Chapter 7. Operation
⑥ Variable real-time search function
Selecting the button to search the variables displayed on the screen in real time changes the
button to a negative angle and executes a real-time search. Selecting the button once again
changes the button to a positive angle and stops a real-time search. You cannot execute a variable
restoration function from a variable backup file in the PC during a real-time search.
⑦ Position variable, L variable search function
There are tens or hundreds of variables in the position variable and L variable table, so selecting
a relevant table to find a variable at once and pressing a numeric key can change the search to the
relevant number.
Ex) Select an L variable table
Æ
Enter the “ESCAPE” key
Æ
Enter “1”,“2”,“3” keys in
regular sequence
Æ
L123 is searched on the L variable table.
(3) Program explorer
The program explorer can handle MC programs registered in the MCU.
A program explorer window is composed of an MC program list part and a command part.
The user can see all the MC programs registered in the MCU through the MC program list
part. The command part is composed of command buttons that can handle MC programs, and
the function and action of a command button are described below.
① button
This is a function to copy an MC program registered in an MCU into an MC program of
another name. The action steps of file copy are as follows:
- Select a program to copy from the MC program list.
- Select the
button. Then the command part is converted into the
confirmation part as follows:
- Enter the name of an target program to copy in the file name input test box in the
confirmation part.
- Selecting the button in the confirmation part executes a file copy and
converts the confirmation part into a command part again.
- In order to cancel the file copy, select the button. Then its execution
is canceled, and the confirmation part is converted into a command part again.
MC program
list
Command
part