EMC DL3D 1500, Administrator'S Manual

Page: 48 / 238

48 EMC DL3D 1500 and DL3D 3000 Administrator’s Guide
Configuring DL3D 1500/3000
Configuring SNMP
Simple Network Management Protocol (SNMP) is a set of protocols
for managing complex networks. SNMP works by sending messages,
called protocol data units (PDUs), to different parts of a network.
SNMP-compliant devices, called agents, store data about themselves
in management information bases (MIBs) and return this data to the
SNMP requesters.
To access the SNMP page, from the Configuration page, click SNMP.
The management frame displays the SNMP page.
The SNMP page is divided into the following sections:
◆
Destinations
◆
Community
◆
Test
Destinations
Use the Destinations page to add, edit, or delete SNMP trap
destinations.
To add an SNMP destination:
1. Click Add.
2. Type the IP address that receives the SNMP traps generated by
the DL3D appliance, for example, 12.34.56.78.
3. Type the SNMP community string in the Name field.
4. Enable the trap selections to be reported.
Table 2 SNMP trap selections
Field Description
Informational Generates a trap on system-detected events.
Warning Generates a trap on system-detected warning conditions.