manualshive.com logo in svg

EMC DL3D 1500, Administrator'S Manual

Share
Download
EMC DL3D 1500 Administrator'S Manual Download Page 162

162

EMC DL3D 1500 and DL3D 3000 Administrator’s Guide

Managing Data Services

2. On the Replication page, click the Target Role link.

The Target Role pages differ depending on the type of data being 
recovered (virtual tape library or share). The following sections 
provide information for your specific data type:

◆

Recovering a virtual tape library

◆

Recovering a NAS share

Recovering a virtual tape library

To recover a virtual tape library:

1. Click VTL in the Target Role page.

The Target Role VTL page displays the available virtual tape 
libraries that have been replicated. The page also displays 
information on failback jobs.

2. To recover a virtual tape library, select the virtual tape library and 

click Recover.

3. The system prompts you to enter a name for the recovered virtual 

tape library. This name must be unique on the target system.

The virtual tape library and its cartridges are recreated on the 
target system. You must add tape drives and a robot and map the 
devices before the virtual tape library is accessible.

Recovering a NAS share 

To recover a NAS share:

1. Click NAS in the Target Role page.

The Target Role NAS page displays the available NAS shares that 
have been replicated. The page also displays information on 
failback jobs.

2. To recover a NAS share, select the NAS share and click Recover.

3. The system prompts you to enter a name for the recovered NAS 

share. This name must be unique on the target system.

4. The NAS share is recreated on the target system and is ready for 

use.

Note: 

If the source share is an NFS share, then the target NFS share must 

be restored as an NFS share. If the source share is a CIFS share, then the 
target CIFS share must be restored as a CIFS share. 

Summary of Contents for DL3D 1500















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands