EMC DL3D 1500, Administrator'S Manual

Page: 226 / 238

226 EMC DL3D 1500 and 3000 Administrator’s Guide
Mounting or Mapping the NAS Shares
3. Launch the NetBackup Administration Console.
4. From Storage > Storage Units, right-click and select New.
5. Type the name of the CIFS share name you created on the DL3D.
6. Choose Storage Unit type: Disk > Basic Disk.
7. Type in the absolute pathname to the share, for example,
\\10.40.167.37\mycifs1.
8. Click Properties to ensure that the share is accessible. If you see
capacity for the share, continue with the next step. Otherwise,
correct the issue.
9. Change the number for the max concurrent job to your desired
value.
10. Define a fragment size (recommended is 2000).
11. Under Device Manager/Services, edit the Netbackup Client
service . (For NBU version 6.5, you may have to change most of
the NetBackup Services to use the Logon account credential of the
CIFS shares.)
a. Open the Windows Services directory and stop all NetBackup
services.
b. Select NetBackup Service.
c. Under the Log On tab select This account and enter the media
server's username and password your media server uses to
log in to its domain.
d. When you have made all necessary edits, restart the
NetBackup services and exit the Services directory.
12. Launch the NetBackup Administration Console.
13. Define the policy for a NetBackup job to use with the DL3D.
14. Right-click on the policy you created and choose Manual backup
to test the setup.
Symantec Backup Exec
1. Create a CIFS share on the DL3D and join a workgroup or domain
type authentication domain (using the same type as the Backup
Exec server).
2. Map the CIFS share as a network drive in Windows Explorer.