EMC DL3D 1500, Administrator'S Manual

Page: 110 / 238

110 EMC DL3D 1500 and DL3D 3000 Administrator’s Guide
Configuring and Managing Disk Backup
The plug-in is saved in lib/ost-plugins directory located under the
NetBackup install location:
<location of netbackup>/lib/ost-plugins
Adding a storage server
The Storage Servers page is used to add, edit, or delete OST storage
servers.
To view the Storage Servers page, from the OST page, click Storage
Servers
. The Storage Servers page appears.
Note: The connections for a storage server = number of data s 1 (for
each LSU polling of the storage server). A backup job may generate more
than one data stream if the data can be read in parallel. For example, a policy
that is backing up the A, B, C, and D drives of a Windows system can
generate four data streams in parallel.
To add a storage server:
1. Click Add to add a storage server.
The Add Storage Server page appears.
2. Type the storage server information as desired. ( Table 10 provides
a description of the fields).
Note: If you are editing a storage server, you can edit only the
Description
and
Enforce read-only access to this share
options.
You can also change the de-duplication policy from immediate to
scheduled and vice versa, or change the window for scheduled
de-duplication.
3. Select Enable De-Duplication to enable de-duplication for this
storage server. By default, de-duplication is not enabled. Once the
storage server has been created, de-duplication cannot be enabled
or disabled for it.
4. If scheduled de-duplication is desired, select Enable Backup
Window and specify the backup window. De-duplication of that
data will not occur during this time duration each day. Only one
backup window may be set. By default, selecting Enable
De-duplication
enables immediate de-duplication for the storage
server.
a. From the list box, select the start time for the backup window.