EMC DL3D 1500, Administrator'S Manual

Page: 177 / 238

Virtual tape library commands 177
Command Line Interface
Syntax syscli --list library
Output
library count = 3
library = 1
productid = DL1500
description = EMC Disk Library
library = 2
productid = Scalar 100
description = ADIC Scalar 100
library = 3
productid = Scalar i2000
description = ADIC Scalar i2000
list tapedrive
Lists all available virtual tape drive models
Description The list tapedrive command lists the available virtual tape library
models. The specific virtual tape drive model is required while
adding or creating a new virtual tape library.
Syntax syscli --list tapedrive
Output
tapedrive count = 2
tapdrive = 1
model = QUANTUMDLTS4
description = Quantum DLT S4
tapedrive = 2
model = QUANTUMSDLT320
description = Quantum SDLT 320
add vtl
Adds a new virtual tape library
Description The add vtl command lets you add a virtual tape library. You must
specify the virtual tape library name, library model, number of
storage slots, virtual tape drive model, and the number of virtual tape
drives. You can also specify whether or not to enable de-duplication
and backup window. Once the virtual tape library is created, you can
only change the backup window state, but cannot change the
de-duplication state. You can also specify the backup window start
and end time.