EMC DL3D 1500, Administrator'S Manual

Page: 218 / 238

218 EMC DL3D 1500 and 3000 Administrator’s Guide
Veritas NetBackup OST and LSU Configuration
Veritas NetBackup OST and LSU Configuration
Once NetBackup is installed, must register the storage servers with
NetBackup by adding the storage server to the NetBackup
configuration.
To add the storage server to NetBackup:
1. Type this command to add the storage server to NetBackup:
/usr/openv/netbackup/bin/admincmd/nbdevconfig –creatests
–storage_server <storage-server-name> -stype EMC
–media_server <media_servername> -st 9
The storage server name should not resolve to an IP address on a
media server host. The storage server name should be in the
following format:
<storage server name as entered in DL3D GUI>_<IP address of
DL3D interface>
Example:
• Adding a storage server by name: server1_10.180.12.205
• Adding a media server by name: nbumedia.emc.com
/usr/openv/netbackup/bin/admincmd/nbdevconfig –creatests
-storage_server server1_10.180.12.205 –stype EMC
–media_server
nbumedia.emc.com –st 9
2. Type this command to add the credentials of the storage server:
/usr/openv/volmgr/bin/tpconfig -add –storage_server
<storage_server_name> -stype EMC –sts_user_id ndmpuser
-password password
Example:
Adding credentials for storage server: server1_10.180.12.205
/usr/openv/volmgr/bin/tpconfig -add –storage_server
Server1_10.180.12.205 –stype EMC –sts_user_id ndmpuser
-password password
OST tpconfig credentials should match that of NDMP PTT
credentials.