EMC DL3D 1500, Administrator'S Manual

Page: 158 / 238

158 EMC DL3D 1500 and DL3D 3000 Administrator’s Guide
Managing Data Services
CAUTION
!
If a node fails during a replication job, the replication job must
be restarted.
The NAS share replication process begins. The status of the
current replication displays in the Status area.
◆
To abort namespace replication of a NAS share in progress, select
the share and click the Replicate/Abort button.
◆
To synchronize a NAS share configured for directory/file-based
replication, click Synchronize/Abort. Only NAS shares enabled
for directory/file-based replication can be synchronized.
◆
To abort a synchronization in progress, click Synchronize/Abort.
Performing source role actions
You can perform the following actions:
◆
Managing replication service. See “Managing replication service”
on page 158 .
◆
Changing the replication state. See “Enabling or disabling
replication” on page 159 .
◆
Generating replication reports. See “Generating replication
reports” on page 159 .
◆
Viewing replication performance. See “Viewing replication
performance” on page 160 .
Managing replication service
Use the Source Role Actions page to pause or resume the replication
service. Click Actions on the Source Role page to view the Source
Role Actions
page. The Source Role Actions page appears.
The replication service controls both replication and failback traffic.
◆
Click Pause to pause both replication and failback traffic for a
replication in process. When you click Pause, the system will
continue to replicate the current block of information in process.
Since the block can be as large as 250 MB, the process of
completing the current block replication can take up to 15
minutes to complete. Once that block has completed replication,
the system will pause and wait to resume.