manualshive.com logo in svg

EMC DL3D 1500, Administrator'S Manual

Share
Download
EMC DL3D 1500 Administrator'S Manual Download Page 163

Recovering replicated data

163

Managing Data Services

Data failback

If a virtual tape library or NAS share has been destroyed or corrupted 
on the original source system, the data failback option copies the 
replicated virtual tape library or share from the target system to the 
source system. Once the replicated virtual tape library or share is 
copied to the source system, it can be recovered on the source system 
and returned to normal operation.

To fail back a virtual tape library or share:

1. Access the remote management pages on the target system.

2. On the Replication page, click Target Role.

The Target Role pages differ depending on the type of data being 
replicated (virtual tape library or share). The following sections 
provide information for your specific data type:

◆

Failing back a virtual tape library

◆

Failing back a NAS share

Failing back a virtual tape library

To fail back a virtual tape library:

Note: 

You must configure the 

Target Role

 IP address on the 

source

 system 

before you fail back a 

virtual tape library

.

1. On the Target Role page, click VTL.

The Target Role VTL page displays the available virtual tape 
libraries that have been replicated. The page also displays 
information of failback jobs.

2. To fail back a virtual tape library, select the virtual tape library 

and click Failback.

The system prompts you for the hostname or IP address of the 
source system.

3. Type the hostname or IP address of the source system where you 

want the replicated virtual tape library to fail back.

The virtual tape library is recovered to the source system. 

4. Open a new browser and access the remote management pages 

on the Source system.

Summary of Contents for DL3D 1500















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands