EMC DL3D 1500, Administrator'S Manual

Page: 121 / 238

Hardware 121
Viewing Status
Clicking the Fibre Channel adapter link shows the port status for that
adapter in the section below. For each adapter, the port Name and the
Value
are shown. The value shows the current link speed detected for
the connection.
The port Status can be:
◆
Up - port is connected
◆
Down - port is not connected
Network adapters
The appliance engine contains network adapters and Ethernet ports.
Each Ethernet port is shown in the Name column with the Status
shown in the far right-hand column.
The status can be:
◆
Up - port is connected
◆
Down - port is not connected
Storage arrays
The Common tab displays the components the DL3D 1500/3000
appliance shares. Clicking Storage Arrays displays a list of both the
RAID storage systems and JBODs. The Name list displays the names
of storage systems. The Status for each storage system is shown in
the far right-hand column.
The Storage Array status can be:
◆
Normal indicates that the storage system is operating within
normal operating parameters.
◆
Failure indicates that the storage system has failed and requires
attention.
◆
Missing indicates that the storage system has been removed.
Clicking the storage system name link displays the components for
that specific storage system in the component list below the Storage
Array
list. Clicking the component link displays the status for the
specific component.