EMC DL3D 1500 Administrator'S Manual Download

Page: 114 / 238

114

EMC DL3D 1500 and DL3D 3000 Administrator’s Guide

Configuring and Managing Disk Backup

1. View storage servers and LSUs. See

“Viewing storage servers and

LSUs” on page 114

2. Edit a storage server. See

“Editing a storage server” on page 114

3. Delete a storage server. See

“Deleting a storage server” on

page 114

4. Edit an LSU.

“Editing an LSU” on page 115

5. Delete an LSU.

“Deleting an LSU” on page 115

Viewing storage servers and LSUs

To view the Storage Servers page, from the OST page, click Storage
Servers

. The Storage Servers page appears.

The Storage Server summary page lists the configured storage
servers on the system as well as the maximum number of OST
storage servers allowed (100), number of storage servers created, and
number of logical storage units created (LSUs).

The LSU page is used to add, edit, or delete LSUs. To view the LSU
page, from the OST page, click LSU. The LSU page appears.

Editing a storage server

To edit a storage server:

1. To access the Storage Servers page, from the OST page, click

Storage Servers

. The Storage Servers page appears.

2. Click the storage server name on the Summary page or click Edit.

The Edit Storage Server page appears.

3. Edit the storage server information as desired.

Note:

If you are editing a storage server, you can edit only the

Description

and Enforce read-only access to this share options. You can

also edit the de-duplication settings, but you cannot disable
de-duplication once it is enabled.

4. Click Apply.

Deleting a storage server

To delete a storage server:

Summary of Contents for DL3D 1500















































































































































































































































Search results

Summary of Contents for DL3D 1500

Reviews:

Related manuals for DL3D 1500

Brands by name

Popular brands

EMC DL3D 1500, Administrator'S Manual

Search results

Summary of Contents for DL3D 1500

Reviews:

Related manuals for DL3D 1500

Brands by name

Popular brands