EMC DL3D 1500, Administrator'S Manual

Page: 120 / 238

120 EMC DL3D 1500 and DL3D 3000 Administrator’s Guide
Viewing Status
Boot disks
The boot disks consist of two hard drives (in a RAID 1 configuration)
installed in the front of the appliance engine. These hard drives
contain the DL3D 1500/3000 system software. The details for the boot
drives show the partitions and storage devices configured on the boot
drives.
Each partition status is shown in the far right-hand column.
◆
Normal indicates that the partition is operating within normal
operating parameters.
◆
Failure indicates that the boot drive containing this partition has
failed and must be replaced.
Compression adapters
The compression adapters provide a hardware compression
capability for the DL3D appliance. The DL3D 3000 server contains
two compression adapters (compression card 1 and 2); the DL3D
1500 server contains only one compression adapter (compression
card 1).
Each compression adapter status is shown in the far right-hand
column.
◆
Normal indicates that the compression adapter is operating
within normal operating parameters.
◆
Failure indicates that the compression adapter has failed and
must be replaced.
◆
Missing indicates that the compression adapter has been
removed.
FC adapters
The appliance engine contains two Fibre Channel adapters with Fibre
Channel ports. Each Fibre Channel adapter is shown as a link in the
Name
column with the Status shown in the far right-hand column.
◆
Normal indicates that the Fibre Channel adapter is operating
within normal operating parameters.
◆
Failure indicates that the Fibre Channel adapter has failed and
must be replaced.
◆
Missing indicates that the Fibre Channel adapter has been
removed.