EMC-PARTNER 103514, User Manual

Page: 92 / 112

MIG-OS-OS1_MIG0603OS1_MIG0603OSI M odular I mpulse G enerator
92/112
13.7 Software "GENECS" for MIG Remote Control
The GENECS software delivered on a CD (the CD can be found in the cover of the manual binder), can be
used to control the MIG-Tester via the RS-232 port. The MIG tester can only be controlled when the
software is ordered and the entry code is available when installing GENECS.
13.7.1 Setup GENECS
See instruction on the CD. Follow the instruction of the installer program. When the GENECS is installed
and the MIG-Tester via the RS232 connected the display of the MIG-Tester and the display of the
GENECS must show the same figure.
13.7.2 GENECS Windows
The GENECS windows is equal the MIG tester front plate. Online the MIG tester can be remote controlled
by pressing the buttons with the mouse cursor as on the real front plate.
Detailed information can be get from the "help index".
13.7.3 GENECS Library
In the file pull down menu press "open" and activate Library. The Library includes test specified in the
relevant basic and generic standards.