EMC-PARTNER 103514, User Manual

Page: 50 / 112

MIG-OS-OS1_MIG0603OS1_MIG0603OSI M odular I mpulse G enerator
50/112
6.2.2 „Main“ Setting of nominal values
When you press the „Test“ button a selection of installed set-ups depending of the MIG version will be
visible as showed on the following pages.
The parameter values can only be selected within the range given. If values are chosen that are above or
below the given range the maximum or minimum value will be input automatically.
Setting nominal values
6.2.2.1 Damped Oscillatory Wave 1 MHz Test
After pressing Menu "
Main " button:
loaded test loaded test
test parameters tests parameters
6.2.2.1-1 Definition of parameter
Pulse Spacing
Burst Length
A1
A2
With pulse spacing the repetition frequency of the 1MHz or 100 kHz can be selected 1/tperiode =
frequency. e.g. 400 Hz = 2.5 ms pulse spacing
With burst length the duration of a 1MHz or 100 kHz burst can be defined.
t
Polarity Positive
Polarity Negative
Repetition
T
Burst