EMC-PARTNER 103514, User Manual

Page: 56 / 112

MIG-OS-OS1_MIG0603OS1_MIG0603OSI M odular I mpulse G enerator
56/112
6.2.3.2 Ramp functions Polarity
loaded test loaded test
Polaritiy ramps at CWG
The polarity change „change after“ number of pulses. Start is always with the polarity selected in „Main
Menu“.
6.2.3.3 Ramp functions Synchronisation only with an external CDN activated
loaded test loaded test
Angle ramp at CWG
6.2.3.4 EUT error control
EUT error information can come from three different sources:
1. From EUT failed input on the rear side of the MIG testers,
2. From the SURGE limiter and
3. From the current limiter only MIG with a.c. source capabilities e.g. MIG0603IN
The error can initiate different actions:
Acoustic signal Remark in the report Message on display Abort the test
Protocol x x
Next Setup x x x
Stop Run x x x x
SURGE peak limits
loaded test EUT power v, i
ramps at Variation