EMC-PARTNER 103514, User Manual

Page: 32 / 112

MIG-OS-OS1_MIG0603OS1_MIG0603OSI M odular I mpulse G enerator
32/112
4.1.1 Control part
The control of the MIG0603OMX is carried out by a microprocessor. The microprocessor controls the EMC
tests, stores the inputs of the numeric input terminal, updates the display, checks whether the inputs of the
operators are allowed values or not, stores the program and prepares test reports. The operator
communicates with the MIG0603OMX via the numeric input terminal, the display and the soft keys.
For better understanding, the control panel elements will be explained separately from the connection
panel.
fig. 4.1.1
4.1.1.1 The Display
All important information for the operator are permanently shown on the display during the EMC test. The
large graphic display includes additionally 6 soft-keys and some hints or setting range information.
(1)
4.1.1.2 Soft-keys“ (2)
The program in the MIG-tester is a large program, therefore six soft-keys are provided in order to be able to
move and quickly change to different menus.
Example of "Main"
Menu overview
Test Main Ramp General
Choice of test set-ups
storage space 1 to 23 -pre-setting of
nominal values
-definition of
different ramps
-storage and deletion
of set-ups
-EUT limits
-service
-remote control set-up
customers programmes
e.g.
V-peak.
Polarity
Impulse repetition
Synchronisation
e.g.
Start - voltage
voltage steps
number of pulses
per steps
e.g.
Store set-up
Delete set-up
EUT Power limits
EUT Control
Printer ON/OFF
2
6
7
4
5
1
15
14
17
18
13
12
11
10
9
8