EMC-PARTNER 103514, User Manual

Page: 28 / 112

MIG-OS-OS1_MIG0603OS1_MIG0603OSI M odular I mpulse G enerator
28/112
2.3 Precautionary measure during use
The MIG0603-Oxx Generators generate high voltage. The energy content of the SURGE impulse is high
and can be dangerous with improper use. It is wise to observe the following rules:
•
Never touch the EUT when a test is in operation.
•
Touch no connectors of connection cable when a EMC test is in operation.
•
The high voltage of the MIG0603-Oxx GENERATORS and the power on the EUT
must turned off before a manipulation on the EUT is carried out.
•
For all services, e.g. check of the fuses, the power cord must first be unplugged.
Tab. 2.3
The MIG0603-Oxx GENERATORS must be connected to power line with a safety ground. If an Insulation
transformer is involved in TRANSIENT supply the secondary side of the isolating transformer must be
grounded.
2.4 Electromagnetic Compatibility
The outputs of the MIG0603OMX GENERATORS and the links between MIG0603-Oxx GENERATORS
and the EUT can emit disturbances. Please consider the national PTT rules.
The Test System MIG0603-Oxx GENERATORS should not be operated near sensitive measuring and
control systems.
The MIG0603-Oxx GENERATORS fulfils the following immunity requirements:
•
Electrostatic discharge
Level 4 (8 kV) (IEC 1000-4-2)
•
Burst EFT
Level 4 (4 kV) (IEC 1000-4-4)
•
SURGE
Level 3 (2 kV) (IEC 1000-4-5) Fig. 2.4
2.5 The manual is an integral part of the equipment. Refer to the manual.
This manual is an integral part of the MIG0603-Oxx GENERATORS. The safety rules and precautions
in the manual must be observed. EMC PARTNER and their representatives are not responsible for
damage to persons and equipment by not observance the safety rules and precautions in the
manual.