EMC-PARTNER 103514, User Manual

Page: 43 / 112

23.04.2012 E-MIG-OS-OS1-MIG0603OSI-E-Manual 43/112
6 Testing with the MIG0603-Oxx
6.1 Quickstart of the MIG0603-Oxx
When you have studied Chapter 2 „Safety“ and Chapter 5 „Preparation for operation“ and all instructions
have been followed you have green light for a quick start. The quick start includes the most important tests
using the MIG0603-Oxx.
To start a set-up, the follow steps must carried out:
•
Turn the power switch on the rear side to position I
•
Operate the ON/STBY button on the front panel the display turns to:
type of equipment Software version serial number
selectable tests selectable tests
programmed test 1 to 15 dialogue lines gives hints for to the actual display
different language can be chosen.
main parameter of the
selected test e.g. EFT
Press "SETUP"
use arrows to move the cursor
programmed tests programmed tests
back to
selectable test selected test
can be loaded
with the cursor a modified test
can be stored to
the place where
the cursor is
a programmed
test can be
deleted
programmed
test can be
linked programmed
test 11 to 15
Quick test example 1MHz:
•
move the cursor with the arrow to number 3
•
press F2 Load
loaded test loaded test
test parameters tests parameters
back to
programmed
tests back to
selectable tests actual showed
display
further settings
like EUT power
voltage, EUT
failed criteria
more test
parameters