EMC-PARTNER 103514, User Manual

Page: 78 / 112

MIG-OS-OS1_MIG0603OS1_MIG0603OSI M odular I mpulse G enerator
78/112
13.5 Remote Control Command set
Command TST (TeST)
Explanation: set or query the test mode. This command resets all test-specific parameters to the factory
initialisation defaults. The reset must be at the beginning of a parameter set-up.
Arguments: characters IMP1, IMP2, IMP3..........., IMP11
Example: TST IMP1
This command must be used at a generator with different wave shapes.
Command VNOM (Voltage NOMinal)
Set or query V-peak [in V]
Argument: Integer
0..Vmax resp. 0..110 bei DIP
Example: VNOM 1500
VNOM?
Answer: 1500
Command POL (POLarity)
Explanation: Set or query the Polarity.
Argument: Characters POS, NEG
Example: VNOM 1500
POL NEG
Command REP (REPetition)
Explanation: depends on the type of test:
Argument: Integer
Example: VNOM 1500
POL NEG
REP 10
Command NBR (NumBeR)
Explanation: depends on the type of test:
Argument: Integer 0..30000
Example: NBR 10