EMC-PARTNER 103514, User Manual

Page: 39 / 112

23.04.2012 E-MIG-OS-OS1-MIG0603OSI-E-Manual 39/112
5 Preparation for Operation
5.1 Attention, Refer to Manual
This manual is an integral part of the equipment MIG0603-Oxx. The safety rules and precautions in
the manual must be observed. EMC PARTNER and their representatives accept no responsibility
not responsible for damages to persons and equipment as a results of non-observation of the
safety rules and precautions in this manual.
Before connecting the MIG0603-Oxx to a public power line, Chapter 3 „Safety must be carefully studied.
5.2 Operators and Service Personnel
Only trained personnel should carry out EMC tests. EMC PARTNER recommends its own seminars. For
small groups of maximum 10 persons EMC PARTNER AG offers the following in-house seminars in
English or German at the customer’s location:
1. EMV
Introduction
2. EMV Standardisation
3. EMC „ESD“ immunity test
4. EMC „EFT“ immunity test
5. EMC „SURGE“ immunity test
6. EMC „DIPS“ immunity test
7. EMC „HARMONICS“ immunity test
8. EMC „MAGNETIC FIELD“ immunity test
9. EMC „CW CURRENT INJECTION“ immunity test
10. EMC „CE-MARK“ transient immunity tests
11. „NEMP“ immunity test
12. „AC, DC, IMPULSE“ insulation test
13. Flicker
5.3 Checks before operation
5.3.1 Optical verification of the MIG0603-Oxx
Before you unpack the MIG0603-Oxx, please check whether the packing is deformed or damaged. When
the MIG0603-Oxx is unpacked, also check whether the tester is damaged. If you detect a damage, please
inform EMC PARTNER and the shipping organisation immediately.
Figure: 5.3.1-1
Please keep the shipping box on stock. The must be used in case of shipment for verification or repair.