EMC-PARTNER 103514, User Manual

Page: 57 / 112

MIG-OS-OS1_MIG0603OS1_MIG0603OSI M odular I mpulse G enerator
57/112
Limits for SURGE peak measurements:
If selected limits are exceeded a message appears on the display. An error will be registered within a
limited time. (See diagram on next page).
6.2.4.3 Time window for error message SURGE
At t-4 seconds, the charging of the SURGE capacitor for the next impulse number 2 starts.
t-2 seconds is the last possible opportunity to give an error message from impulse number 1 via the EUT
failed input on the rear side of the TRANSIENT-2000.
At t-1second, the data of impulse 1 will be printed out and the error message will possibly be reset.
The error can initiate different actions:
Acoustic signal Remark in the report Message on display Abort the test
No Action x x
Info Only
x x x
Stop Run
x x x x
Repetition
t t-1s t-2s t-4s
Impulse 1
Impulse 2