EMC-PARTNER 103514, User Manual

Page: 65 / 112

MIG-OS-OS1_MIG0603OS1_MIG0603OSI M odular I mpulse G enerator
65/112
8.1.3 Attention notice „Warning Generator stopped“
EUT FAILED: Vpk: xxxxV > xxxxV
The selected voltage limits have been exceeded during SURGE
testing.
-Check limits
-EUT is defective.
EUT FAILED: Vpk: xxxkV <xxxkV
During SURGE test, the voltage has fallen below the selected
voltage limits:
-Check limits
-EUT is defective.
EUT FAILED: Ipk: xxxkA > xxxkA
The selected current limits have been exceeded during SURGE
test.
-Check limits
-EUT is defective.
EUT FAILED: Ipk: xxxkA <xxxkA
During SURGE test, the current has fallen below the selected
limits:
-Check limits
-EUT is defective.
EUT FAILED: External event
The input EUT failed has been activated ( grounded).
-Check EUT failed
-EUT is defective
EUT FAILED: by operator The operator has pressed FAIL on the MIG front panel. .
Overcurrent: I-power : xxxA (>xxA) FOR MIG generators with built in CDNs. The continuous current
of the EUT limit has been exceeded (AC)
Manual Trigger Timeout (>100sec) During SURGE and with manual trigger, the high voltage will be
switched off after 100 seconds, if no pulses have been
released..