EMC-PARTNER 103514, User Manual

Page: 20 / 112

MIG-OS-OS1_MIG0603OS1_MIG0603OSI M odular I mpulse G enerator
20/112
1.4.3
Voltage tester 1,2/50, 0.5 J, 500
Ω
SURGE part
Waveform at no load:
No load = R > 100
Ω
Rise time 1.2 µs ± 30%
Time to half value 50 µs ± 20%
Adjustable voltage range 250 V up to 6'300 V
Automatic range changing 250 v up to 575 V
575 up to 1150 V
1150 V up to 3450 V
3450 V up to 6300 V 4 µF
1 µF
110 nF
40 nF
Settings 1 V steps
Maximum voltage 6000 V +10% -0%
Minimum Voltage 500 V -10% +0%
Polarity pos. / neg. / alternate
Test voltage Energy Generator-
impedance Impulse
Capacitor Voltage
waveform oc Current
waveform sc
0.5 kV 0.5 J 500 Ohm 4.0 uF 0.5kV 1.2/50us 1A 1.2/50us
1 kV 0.5 J 500 Ohm 1.0 uF 1kV 1.2/50us 2A 1.2/40us
2.5 kV 0.5 J 500 Ohm 120 nF 2.5kV 1.2/50us 6A 1.2/30us
5 kV 0.5 J 500 Ohm 40 nF 5kV 1.2/50us 10A 1.2/10us
MIG0603OSI Control, Measurement
Minimum time between successive
shots at maximum charging voltage 8 Seconds steps
Impulse counter 1 up to 29'999
Trigger auto or manual synchronisation onto the
power line voltage
Ramps - Voltage; - Polarity, - Synchronisation
Voltage measurement:
Peak value on Display
Voltage waveform BNC output (u) Accuracy
250 up to 6'600 V
10 V equals 6'000 V ± 3%
Current measurement:
Peak value on Display
Current waveform BNC output (i) Accuracy
125 up to 3'300 A
10 V equals 3'000 A ± 3%
Protocol Peak values, Polarity, Number of shots, Angle
of Synchronisation
Limits on peak current and peak
voltage for "passed - failed". The
measuring range equal of current
and voltage peak values
•
stop test
•
protocol
•
next test