EMC-PARTNER 103514, User Manual

Page: 37 / 112

MIG-OS-OS1_MIG0603OS1_MIG0603OSI M odular I mpulse G enerator
37/112
4.2.1.9 EUT Failed Input (55)
This input can be used fo a single channel the EUT during the test. EUT failed is equal to 0V.
The trigger value at the output is approximately 3V
Low: active
High: inactive
Driving with an open-collector output is
recommended.
4.2.12 Definition of the inputs EUT failed“ and
external Trigger
4.2.1.10 Trigger Input (52)
This input can be used for an external trigger of surges. The time can not be defined as the trigger is
related to the software clock rate and can differ between trigger 1 and trigger x.
4.2.1.11 Forced cooling of the (56)
A ventilator cools the MIG0603OMX internally. Forced cooling is necessary for the impulse forming network
devices and the electronic high-voltage switch. A distance of about 20 cm must be maintained between the
rear panel of the TRANSIENT 100 and any wall, and about 3 cm between the sides of the MIG0603OMX
and any equipment or wall. The MIG0603OMX can be built into a 19“ rack, with 3 cm side separation.
15V
22k
15V
Input