EMC-PARTNER 103514, User Manual

Page: 21 / 112

MIG-OS-OS1_MIG0603OS1_MIG0603OSI M odular I mpulse G enerator
21/112
1.4.4 General information to MIG control
Set-up memory Up to 23 memory places
Test sequences the test set-ups can be linked serially
Ramps automatic linear variation of one parameter e.g. voltage, frequency
etc.
Synchronisation on different power
line frequencies (CWG only) 16,
2
/
3
;40; 50; 60
Pulse trigger Manual or automatic
Front panel: with Trigger button
Rear panel: with BNC plug
Failure detection on EUT
-External Input EUT failed
-Selectable limit value for impulse voltage and current for SURGE
Safety switching
Emergency stop
Switch off the EMC Test and the EUT power
EUT failed detection during the test. With accessory monitor via RS485 remote control
Test report Printer, connected to the standard port RS 232
Control of external CDN via RS 485 port e.g. IN-1000
1.4.5 Port "Auxiliary"; pin numbers