background image

UNPACKING

After unpacking unit, inspect 
carefully for any damage that 
may have occurred during transit. 
Check for loose, missing, or 
damaged parts. If any damage 
is observed, a shipping damage 
claim must be filed with carrier. Do 
not use the OEM Portable Power 
Source if broken, bent, cracked or 
damaged parts (including labels) 
are noted. Any Portable Power 
Source that appears damaged in 
any way, operates abnormally or is 
missing parts should be removed 
from service immediately. If you 
suspect that the Portable Power 
Source was subjected to shock 
load (a load that was dropped 
suddenly, unexpectedly, etc.) 
immediately discontinue use until 
it has been checked by a factory 
authorized service center.    

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect 
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions 
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.

This is the safety alert symbol.  It is used to alert you to potential personal injury hazards. Obey all safety 
messages that follow this symbol to avoid possible injury or death.

The following safety information is provided as guidelines to help you operate your Portable Power Source under 
the safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety 
or safe handling instructions are not known or not followed. The following safety instructions are to provide the 
user with the information necessary for safe use and operation. Please read and retain these instructions for the 
continued safe use of your service system. Failure to follow instructions listed below may result in serious injury. 
In addition, make certain that anyone that uses the equipment understands and follows these safety instructions 
as well.

Operating Instructions and Parts Manual 

24370

03/16

2016 ©OEMTOOLS

FOR CUSTOMER SERVICE

Technical Question?

 

CALL 1-866-458-2472

[email protected]

MULTI-USE PORTABLE POWER 

SOURCE WITH JUMPER CABLES

WARNING

Summary of Contents for 24370








Reviews: