4
Operating Instructions and Parts Manual
24370
MULTI-USE PORTABLE POWER
SOURCE WITH JUMPER CABLES
IMPORTANT SAFETY INSTRUCTIONS
The warnings, precautions, and instructions discussed
in this manual cannot cover all possible conditions
and situations that may occur. The operator must
understand that common sense and caution are
factors which cannot be built into this product, but
must be supplied by the operator.
DISPOSAL
At the end of the useful life of the OEMTOOLS Portable
Power Source, dispose of the components according
to all state, federal, and local regulations.
PURPOSE
The OEMTOOLS Portable Power Source 24370 is a
power source that is pocket sized but powerful enough
to start a car, light duty truck, motorcycles, boat or ATV
many times and can also charge cell phones, tablets
and cameras.
1. Always make sure the blue plug of the jumper
cable is fully engaged in the jump start socket
before jump starting the vehicle. This can limit the
available power and may cause damage or melting
of the blue plug.
2. Always make sure jumper clamps are well
connected, check if the vehicle’s battery
connections are rusted or dirty and if necessary,
clean before jumping start the vehicle.
3. DO NOT attempt to jump start more than 3
times. Otherwise, it can damage the OEMTOOLS
Portable Power Source. If your vehicle will not
start, check for other problems
4. DO NOT connect the two clamps. Otherwise, it
may be dangerous!
5. DO NOT disassemble the OEMTOOLS Portable
Power Source. Otherwise, it may be dangerous!
• Charge only using the charger provided with the
OEMTOOLS Portable Power Source
• Under extreme conditions, battery leakage may occur.
Carefully wipe the liquid off using a cloth and avoid
skin contact when you notice liquid on the batteries.
In case of skin or eye contact, rinse immediately with
clean water and seek medical attention.
• Do not attempt to jump start Diesel Engines
03/16
2016 ©OEMTOOLS
Size
160*75*28mm
Weight
420g
Battery Capacity
44.4Wh
Output
5V=2A; 12V=10A;
Input
14V=1A
Full Charging
Time
3 Hours
Starting Current
200A
Peak Current
400A
Operating
Temperature
-5°F ~ 140°F
PRODUCT SPECIFICATIONS
WARNING
OEMTOOLS Portable Power Source. Only a repair technician
may repair this unit.
