ELTEX SMG-2, Operation Manual, Page: 93 / 198

SMG digital gateway 93

IP channels state (statistics for the current calls via IP).
Statistics of the current calls performed via IP channels includes the following data:

channel number;

channel state;

call identifier;

caller MAC address;

caller IP address;

caller number;

callee MAC address;

callee IP address;

callee number;

channel engagement duration.
– Sys Name —device name.
– Sys Contact —contact information.
– Sys Location —device location.
– ro Community —parameter read password/community.
– rw Community —parameter write password/community.
–
Apply— applies the changes.
–
Reset—discards the settings.
4.1.9.2 SNMP Trap Configuration
For detailed monitoring parameters and traps description, see MIB files on the disk shipped
with the gateway.
The SNMP agent sends an SNMPv2-trap message in case of the following events:

configuration error;

SIP module failure;

IP submodule failure;

linkset failure;

SS-7 signal channel failure;

synchronisation loss or synchronisation from a lower priority source;

E1 stream failure;

remote stream failure;

configuration error fixed;

SIP-T module restored after a failure;

IP submodule restored after a failure;

linkset restored after a failure;

SS-7 signal channel restored after a failure;

synchronisation from a higher priority source restored;

no stream failure (after a failure or remote failure);