SMG digital gateway
175
CPU @ 800 [MHz]
L2 @ 533 [MHz]
TClock @ 200 [MHz]
DDR @ 533 [MHz]
DDR 16Bit Width, FastPath Memory Access
DRAM: 512 MiB
Initialize PHY on port1
Map: Code: 0x1fefb000:0x1ff8f9c0
BSS: 0x1ffefaf8
Stack: 0x1f9eaef8
Heap: 0x1f9eb000:0x1fefb000
NAND: Using Hamming 1-bit ECC for NAND device
1024 MiB
MMC: MRVL_MMC: 0
SF: Detected MX25L12805D with page size 64 KiB, total 16 MiB
*** Warning
–
bad CRC, using default environment
PCI:
Initialize and scan all PCI interfaces
PEX unit.port(active IF[-first bus]):
------------------------------------------
PEX 0.0(0): Detected No Link.
PEX 0.1(1): Detected No Link.
ready
FPU not initialized
USB 0: Host Mode
USB 1: Host Mode
SF: Detected MX25L12805D with page size 64 KiB, total 16 MiB
Factory settings:
MODEL : <SMG-4>
S/N : <VI3F000026>
HW : <1v1>
WAN MAC : <A8:F9:4B:88:29:93>
LAN MAC : <02:00:04:88:29:93>
Net: egiga0, egiga1 [PRIME]
Type 'stop' to stop autoboot: 0
SMG4>>
7.
Enter
set ipaddr <device IP address> <ENTER>
.
Example: set ipaddr 192.168.2.2
8.
Enter
set netmask <device network mask> <ENTER>.
Example: set netmask 255.255.255.0
9.
Enter
set serverip <IP address of the computer which runs the TFTP server> <ENTER>
.
Example: set serverip 192.168.2.5
10.
Enter
mii si <ENTER>
to activate the network interface: