ELTEX SMG-2, Operation Manual, Page: 89 / 198

SMG digital gateway 89
and VPN/PPTP interfaces are established. These routes are required for normal operation of the interfaces.
To create, edit, or remove a route, use the
Objects—Add Object , Objects—Edit Object , or Objects—
Remove Object menus and the following buttons:
— Add Route;
— Edit Route Parameters;
— Remove Route.
Route Parameters

Enable —when checked, enables the route.

Destination —an IP network, an IP address or the default value (to set a default gateway).

Mask —specifies a network mask for the defined IP network (use mask 255.255.255.255 for IP
address).

Gateway (IP address or
*
) —defines an IP address of the route gateway.

Interface —the selected network transmission interface.

Metric —route metrics.
4.1.8.10 Network Settings
This submenu can be used to specify a device name and to
change the network gateway address, the DNS server address, and the
SSH/Telnet access ports.
Device Network Parameters

Hostname —device network name.

Use gateway from —network gateway address for the device.

Primary DNS —primary DNS server.