ELTEX SMG-2, Operation Manual, Page: 130 / 198

130 SMG digital gateway
show_dirs Show a path to the FTP server access
directory
signature <CDR_SIGNATURE> String, 63 characters
max. Specify a discriminant that will
facilitate identification of the device
which created the record
unsuccess <CDR_UNSUCC> yes/no Store / do not store unsuccessful calls
(not resulted in conversation) into
CDR files
upload archive
ftp/tftp
<ARCHIVE_NAME>
<FTP/TFTP_server> String, 63 characters
max.
IP address Send an archive to the FTP/TFTP
server
4.3.7 Access Categories Configuration Mode
To enter this mode, execute the access category command in the configuration mode.
SMG4-[CONFIG]> access category
Entering Access-Category mode.
SMG4-[CONFIG]-[ACCESS-CAT]>
Command Parameter Value Action
? Show the list of available commands
config Return to the Configuration menu
exit Return from this configuration submenu
to an upper level
quit Terminate this CLI session
set access <CAT_IDX>
<ACCESS_IDX>
<ACCESSIBLE> 0-63
0-63
enable/disable Define mutual access permissions for
categories:
-
CAT_IDX —index of the access category
being configured;
- ACCESS_IDX—the category the access is
configured to;
- ACCESSIBLE—category access status
(available, not available).
set name <CAT_IDX>
<NAME> 0-63
Access
category
name, 31 character
max.
(letters,
numbers, "_")
Set Access-Category parameters:
-
CAT_IDX —index of the access category
being configured;
- NAME—access category name.
show category <CAT_IDX> 0-63 Show this access category configuration
show list Show all access categories configuration
4.3.8 E1 Stream Configuration Mode
To enter this mode, execute the e1 <E1_INDEX> command in the configuration mode, where <E1_INDEX>
is the number of an Е1 stream.
SMG4-[CONFIG]> e1 0
Entering E1-stream mode.
SMG4-[CONFIG]- E1[0]>